What To Do When Your Hot Water Heater Starts Leaking


What To Do When Your Hot Water Heater Starts Leaking

Steps To Take When Your Water heater leaks

The thing is, until and unless your tank has a hole, chances are you won’t detect leaks.

When your hot water tanks start dripping or leaking, it’s best to get to the bottom of the matter immediately. Water heater repair is definitely expensive, but you can save money and avoid water leaks in the future by taking the following steps.

Detect water heater leaks

Typically, hot water repairs are needed every eight years. Still, inconsistent pressure valves, loose water connections, corrosion, water temperature, cracks in the storage tank, and broken drain valves cause hot water to leak.

To start with, one needs to find the source of the leak –look for any holes or condensation. Hot water tanks are generally prone to leaks in areas that are close to the plumbing pipes or have a lot of water droplets outside the water tank. One also needs to check the inlet and outlet for water leaks.

Before you implement any water heater repairs, it’s all about focusing on detecting the water heater leaks. If any of the following occurs, you might have a faulty heater, and it’s essential to monitor the tank.

Turn Off The Power

After finding water heater leaks, turn off every energy source that powers the heater tank. Using a circuit breaker box is recommended to shut the water heater. Find the breaker to turn it off.

On the other hand, gas heaters are much easier to shut off as they have a flicking switch.

Shut Off The Water Supply

Next comes the step to stop the cold water flow to the hot water tank. Generally, the water heater consists of two pipes connected to the top of the water heater. One of them is the cold water supply inlet pipe, and that’s where the water supply comes from. Usually, it’s indicated with blue color, but it’s not, don’t worry. Simply touch and feel which is cooler and shut the water supply.


There are primarily two types of water supply waves:


Dial valves – They generally have a wheel shape valve that must be turned clockwise to close the water supply. Keep turning the wheel until it stops turning anymore to be sure that no water is flowing.

Ball valve – They have a lever handle that needs to be pulled or sometimes turned to shut the water supply.

Drain The Water Tank

Once you have completely turned off the water supply to the hot water heater, it is time to move on to the next step – draining the water tank. Firstly, find a drain valve, which is usually placed on the bottom of your water heating system. You would need to attach it to a hose to drain water out; otherwise, your basement would end up becoming a riverbed.

Now attach the hose to a floor drain or sump pit, and ensure the hose is connected correctly before opening the valve.


Call A Hot Water Heater Repair Professional – Superior Plumbing And Drains

The last step one must take is to call a qualified plumber or check for water heater repair near me on the Internet to find a reliable technician. If your heater tank leaks from the base, it probably needs a hot water heater replacement. Water heater repairs aren’t DIY projects that can be done by oneself.